Hotline0513-83351077

Service Hotline:0513-83351077 Tel:0513-833519400513-83841007
Fax:0513-83351087
Static mixer
Static mixer is a kind of high-efficiency mixing equipment without any movable elements. Beside wide applications in the fields of oil refining, chemical engineering industries, the mixer can also be used in the fields of medical science, foodstuff, mine refining, plastic squeezing and environment protection department. Compared with traditional mixers, glue ground, venturi, the static mixer is characteristic of simple flow process, compact structure, low energy consumption, less investment, easy operation, free maintenances as well as good performance. At the case of liquid—liquid, liquor-solid, air-air mixing, emulsification, neutralization, absorption, abstraction, reaction and reinforcement heat conduction, the kind of static mixer can be used to replace traditional equipments.
Denotation of product types

Calculation for pressure loss of static mixer
The static mixer is to be used in the pipe with large pressure loss. When the systematic pressure of the static mixer rises high, the pressure loss can be ignored, while the systematic pressure of the static mixer becomes lower, the pressure loss of the static mixer should be calibrated. Method for the calculation for pressure loss of static mixer differs depending on the model of static mixer. Referring to the calculation of static mixer, please contact our Technical Division of the Company.

1、SV Static Mixer
■ Product features

      SV unit is a cylindrical column configured by some corrugated steel plates in defined dimensions with technical specifications as : maximum divergence degree 1-2 μm, the non-uniform coefficient for liquor-liquor phase and gas-gas phase is.

■ Product types
Specifications
DN(mm)
dh(mm)
Q(m3/h)
规 格
DN(mm)
dh(mm)
Q(m3/h)
SV-2.3/20
20
2.3
0.5-1.2
SV-5-20/200
200
5-20
56-110
SV-2.3/25
25
2.3
0.9-1.8
SV-5-20/250
250
5-20
88-176
SV-3.5/32
32
3.5
1.4-2.9
SV-5-30/300
300
7-30
125-250
SV-3.5/40
40
3.5
2.2-4.5
SV-7-30/350
350
7-30
173-346
SV-3.5/50
50
3.5
3.5-7
SV-7-30/400
400
7-30
226-452
SV-3.5/65
65
3.5
5-12
SV-7-30/450
450
7-30
286-572
SV-5/80
80
5
9-18
SV-7-30/500
500
7-30
353-706
SV-5/100
100
5
14-28
SV-7-30/600
600
7-30
505-1010
SV-5-7/125
125
5-7
24-34
SV-7-30/1000
1000
7-30
1413-2826
SV-5-7/150
150
5-7
30-60
SV-15-30/1200
1200
15-30
1630-3260
■ Typical Applications
  Gasoline
  Fuel oil
  Oil mixing
  Salt water neutralization
  Acid and base neutralization
  Gas mixing
 
2、SK Static Mixer
■ Product features

SK unit is configured by welding some spiral plates with single pore canal twisted from left to right with technical specifications as : maximum divergence degree ≦10μm, the non-uniform coefficient for liquor-liquor phase and gas-gas phase is .


■ Product types
Specifications
DN(mm)
dh(mm)
Q(m3/h)
Specifications
DN(mm)
dh(mm)
Q(m3/h)
SK-5/10
10
5
0.15-0.3
SK-50/100
100
50
14-28
SK-7.5/15
15
7.5
0.3-0.6
SK-62.5/125
125
62.5
22-44
SK-10/20
20
10
0.6-1.2
SK-75/150
150
75
31-64
SK-12.5/25
25
12.5
0.9-1.8
SK-100/200
200
100
56-110
SK-16/32
32
16
1.4-3.2
SK-125/250
250
125
88-177
SK-20/40
40
20
2.2-4.5
SK-150/300
300
150
127-255
SK-25/50
50
25
3.5-7.0
SK-175/350
350
175
173-346
SK-32.5/65
65
32.5
5.9-12
SK-200/400
400
200
226-452
SK-40/80
80
40
9-18
SK-250/500
500
250
353-706

■ Typical Applications
Chemical industry, petroleum, pharmaceutical, foodstuff, fine chemical engineering, plastic environment protection, synthetic fiber, plastic injection color-combination paper making, pulp-chlorine mixing, dissolvent deasphalting, acid and base neutralization, asphalt oil mixing, industrial naphthalene dephenolization, liquid gas sweetening, high polymer mixing, color combination and heat conduction.
3、SX Static Mixer
■ Product features

SX unit consists of some x-type units configured by crossed bars in a defined
rule with technical specifications as: the non-uniform coefficient for liquor-liquor phase and liquor-gas phase is.


■ Product types
Specifications
DN(mm)
dh(mm)
Q(m3/h)
Specifications
DN(mm)
dh(mm)
Q(m3/h)
SX-12.5/50
50
12.5
3.5-7.0
SX-50/200
200
50
56-110
SX-16.25/65
65
16.25
6-12
SX-62.5/250
250
62.5
88-176
SX-20/80
80
20
9-18
SX-75/300
300
75
125-250
SX-25/100
100
25
14-28
SX-87.5/350
350
87.5
173-346
SX-31.25/125
125
31.25
22-44
SX-100/400
400
100
226-452
SX-37.5/150
150
37.5
30-60
SX-125/500
500
125
353-706

■ Typical Applications
  High polymer mixing
  Light benzol-ketone deoiling
  Pulp chlorization bleaching
  Crude oil base pouring process
 
4、SL Static Mixer
■ Product features
SL unit consists of some L-type units configured by crossed bars in a defined rule with
technical specifications as: the non-uniform coefficient for liquor-liquor phase and liquor-gas phase is.


■ Product types

Specifications
DN(mm)
dh(mm)
Q(m3/h)
Specifications
DN(mm)
Dh(mm)
Q(m3/h)
SL-12.5/25
25
12.5
0.7-1.4
SL-100/200
200
100
56-110
SL-16/32
32
16
1.4-2.9
SL-125/250
250
125
88-176
SL-20/40
40
20
2.3-4.6
SL-150/300
300
150
127-255
SL-25/50
50
25
3.5-7
SL-175/350
350
175
173-346
SL-40/80
80
40
9-18
SL-200/400
400
200
226-452
SL-50/100
100
50
14-28
SL-250/500
500
250
353-705
SL-75/150
150
75
32-64
SL-300/600
600
300
410-814
■ Typical Applications
  Sewage treatment
  High polymer mixing
  Heat conduction
  Heat exchange
 
5、SH Static Mixer
Product features
SH unit is configured with double canal with spiral plates inside, the
adjacent canal is staggered by 900 in direction and there is no flow distributing chamber between unit, with technical specifications as: the maximum dispersion =1~2μm, the non-uniform coefficient for liquor-liquor phase and liquor-solid phase is
.

■ Product models
Specifications
DN(mm)
dh(mm)
Q(m3/h)
Specifications
DN(mm)
Dh(mm)
Q(m3/h)
SH-3/15
15
3
0.1-0.2
SH-19/80
80
19
4.0-8.0
SH-4.5/20
20
4.5
0.2-0.4
SH-24/100
100
24
6.5-13.0
SH-5/25
25
5
0.5-1.1
SH-36/150
150
36
31-63
SH-7/32
32
7
0.9-1.8
SH-49/200
200
49
54-108
SH-9/40
40
9
1.6-3.2
SH-74/300
300
74
124/248
SH-12/50
50
12
2.3-4.6
SH-124/500
500
124
174/348
Notes: The flange dimension for two terminals enlarges one time according to the nominal diameter of Company’s products.
■ Typical Applications
  Propylene thiamine mixing
  High polymer mixing
  Color Combination
  Heat transfer
 
Installation of static mixer
During installation, the static mixer should be at the location of the original mixing of two streams or multiple streams. In cases of different usage, the erecting modes differ. The concrete requirements see the following table:

Type
Installation mode
SV
Gas-liquor phase: vertical installation (parallel flow or diverse flow installation)
Liquid–gas phase: horizontal or vertical installation (from the bottom up), similar effect .
Gas-gas phase: horizontal or vertical installation (small gas-gas phase density difference, no directional limitation)
SX
Liquid –liquid phase: horizontal or vertical installation (from the bottom up), similar effect
SL
Liquid –liquid phase: horizontal or vertical installation (from the bottom up), similar effect
Liquor –solid phase: horizontal or vertical installation (from the bottom up)
SH
Gas-liquor phase: The flange dimension for two terminals depends on the nominal diameter of Company’s products, by SL installation mode
SK
Liquor-liquor phase: (vertical installation, from the top to the bottom)
Liquor –solid phase: horizontal or vertical installation (from the bottom up)
Notes: Gas-liquor phase refers to that the gaseous phase flow is working medium flow while liquid phase is passive medium flow
Liquor–gas phase refers to that the liquid phase flow is working medium flow while gas phase flow is passive medium flow.
Notes for order
(1) To help you to have a good selection of ordering the products, please offer the following parameters: a. working medium; b. flow rate kg/h; c. operating pressure Mpa; d. operating temperature 0C; e material viscosity cp; f. substance density kg/m2 g. permissive pressure loss Mpa; h. flange standard; i. material of equipment.
(2) The flange standards of mixers produced by our company refers to HG, HGJ, JB/T, SH, ANSI etc., customers should clear flange standards and specifications during ordering, otherwise misers are to be provided according to HG20592-1997 standard.
(3) If the customer selects products with sleeve, parameters such as maximum operating pressure, max operating temperature, working medium should be noted.
Associated equipment:SN distributor
■ Product features
During the process of fluid transfer, the mixing ration is affected by unbalanced transferring pressure. In order to facilitate the customers to used static mixer, our company has recently developed a new SN-type allotter with injection function to the pressure pump. On condition of guaranteeing the sub-flow rate and making the outlet pressure satisfied. The SN-type allotter consists of a spray nozzle, a reception chamber, a mixing chamber and a diffuser. The main stream passes through the conical inlet in high speed and then forms into low-pressure stream, thus making the sub-stream pumped into the reception chamber. High-pressure vortex (eddy current) in the mixing chamber is diffused through the diffuser that makes the fluid into the static mixer smoothly for optimal effectiveness.
■ Product application
SN distributor is suitable to fluid feeding with two or more than two streams. When pressure of main stream and sub-stream is unbalanced, Venturi-type distributor can be selected while the pressure of main stream and sub-stream is balanced, normal type distributor can be selected.
■ Sketch of SN distributor

Normal- type distributor                      Venturi - type distributor
■ Notes for order
SN distributor works for different process conditions, our company will offer special design and produce any kind of allotters on request of customers.
友情链接:    顶峰彩票-首页   一袋金彩票-安全购彩   pk10回血上岸经验   天地汇棋牌app   一袋金彩票---首页欢迎你